Drilling rig TD 80 CA A4

  The Generation Industrial Group
Ðóññêèé Sitemap Faq
 
 

Purpose

To perform drilling, overhauling and workover operations for oil & gas wells. Also specially designed to perform:

  • pull in & out drill pipes, lifting pipes and pumping rods;
  • bailing;
  • milling of sand and cement plugs;
  • milling of side outlets in casing;
  • deepening of wells;
  • productions operations of wells.

Rig is produced:

  • from viewpoint of mobility: selfpropelled, four axle mounted;
  • from viewpoint of site location: standard version and block module version;
  • for various climate conditions: arctic, temperate and tropical.

Rig shall be supplied in huge bulk while shipment shall follow as below:

  • mast drawworks block installed on selfpropelled truck;
  • mobile deck for drill pipes, separately shipped on trailer;
  • skidded motor pumping unit, mast legs, mud system.
Components, electric system, BOPs, tanks system and others are shipped on separate trailers, featuring sizes within the usual transport limits.

Òechnical data

Hook static operating load (max) 100 tf
Hook max. operating load 80 tf
Drilling depth 4 ½ (24,7 kg/m) drill pipes 1800 m
Mast type MU-80
Mast clearance (ground to crown block) 32 m
Max. length of stands 18m
Engine max output 365 HP
Drawworks drum no. 1
Main wire line OD 25 mm
Main drum speed no. 5+1 R
Main wire line pull 11.5 tf
Traveller block sheave no. 4
Crown block sheave no. 5
Swivel max. static load 80 tf
Rotary table opening 520.7 mm (20 ½”)
Rotary table max. static load 320 tf
Rotary table max speed 300 rpm
Substructure height 4.5 m
Mud pump power 500 HP
Drilling fluid mud volume (mud system)
120 m3

Components (main parts):

1. ROMAN 48 360 VFAE (8x8) truck with engine: - CAT C10 (365 HP/2000 rpm) and CLBT 755 DB transmission or - CAT 3406 Ñ DITA (360 HP/2100 rpm) and ALLISON CLBT 754 DB 1
2. MU 80-32 Mast 1
3. Monkey board 1
4. One drum drawworks 1
5. FH-560 Hydromatic brake 1
6. MC-80 Traveller block 1
7. Hydraulic system 1
8. Air system 1
9. Electric system 1


Îïöèîííûé êîìïëåêò:

1. CH 80 Swivel 1
2. MR 205 mechanic rotary table 1
3. DSD make up & break out device 1
4. TH 1.5 auxiliary hydraulic winch 1
5. Substructure for MR 205 1
6. ASI 15 hook load indicator (optional MD TOTCO) 1
7. Pipe rack 1
8. 3 PN 500 Mud pumping unit 1
9. 120 m3 mud system 1

© 2008 "The Generation Industrial Group".
SiteActiv