Purpose:
This is an automatic degassing system with a cycling operation. It consists of two alternately working vacuum chambers and is used for degassing of mud solutions (including intensively foaming ones) with the purpose of restoration of their specific weight)
Technical data:
| Capacity | ||
| At degassing of intensively foaming solutions* | l/s | 45 – 50 |
| At degassing with unstable gas phase** | l/s | Min. 60 |
| Gas residual in solution after degassing: | ||
| Intensively foaming solutions | % | Max. 2 |
| Unstable gas phase solutions | % | 0 |
| Supply voltage of electric motor | W | 220 – 380 |
| Mains power consumption | kW | 30 |
| frequency | Hz | 50 ± 5% |
| overall dimensions (length × width × height) | m | 3,0 x 2,5 x 2,5 |
| Unit mass, max. | t | 2,92 |
Note:
* Operating vacuum 570 -610 mm Hg
** Operating vacuum 300-400 mm Hg
1. Intake valve DVS-III-06.000.
2. Float valve DVS-III-05.000.
3. Casing DVS-III-09.000.
4. Quick-release valve DVS-III-02 .000.
5. Degassing chamber DVS-III-01.2 00.
6. Intake pipe DVS-III-01.3 00.
7. Plate DVS-III-01.003 .
8. Cones DVS-III-01.002 .
9. Vacuum chamber DVS-III-01.000.
10. Vacuum pump.
11. Discharge valve DVS-III-03 .000.
12, 14. Tank DVS-III-15.000.
13. Choke DVS-III-15.100.
16. Receiver DVS-III-07.000.
17. Spool-type valve DVS-III-04.000.
18. Vacuum gauge.
