Kettle-type evaporators w/shell diameter 800, 1000, 1200, 1600, 1800 and 2000 mm, floating-head (P type) and U-tubes (U type)

back

home

Technical specification

Shell diameter, mm	Outer tube diameter, mm	Pressure Pn, MPa				Passage number per tube	Heat-exchange area, m2		Length, L, mm		Height, Н, mm	S0, mm
		IP		IU
		shell	tube	shell	tube		IP	IU	IP	IU
800	20 25	- 1,6		1,6 -		2	- 38	80 -	8200	7700	876	500
1000	20 25	- 1,6	- 2,5	1,6 2,5	2,5 2,5	2	- 62	120 -	8040	8085	984	650
1200	20 25	- 1,6	- 2,5	1,6 2,5	2,5 2,5	2	- 98	176 -	8485	8100 8280	1088	800
1600	20 25	- *	- *	* -	* -	2	- 175	304 -	8800	8800	1332	1100
1800	20 25	- *	- *	* -	* -	2	- 295	477 -	9500	9300	1652	1100
1800	20 25	- *	- *	- -	- -	4	- 278	- -	9500	9300	1652	1100
2000	20 25	- *	- *	* -	* -	2	- 353	584 -	9830	9700	1694	1500
2000	20 25	- *	- *	- -	- -	4	- 335	- -	9830	9700	1694	1500

* - the units with shell diameter of 1600 and higher can build pressure 1; 1,6; 2,5 MPa, pressure in tubes is 1,6; 2,5; 4,0 MPa respectively.

Identification Example (for ordering):

Floating-head evaporator 1000IP-1,6-M1/25-6-2-U-I as per TU (Spec.) 3612-013-00220302-99
U-tube evaporator 1000IU-1,6-1/25-6-2-U-I по ТУ 3612-013-00220302-99, where:

1000 – shell diameter, mm;, мм;

1,6 - shell pressure, MPa;

M1 - material design;

25 - heat-transfer tube diameter, mm;

6- tube length, m;

2 - passage number per tube;

U - climatic design;

I - insulation fixtures.

© 2008 "The Generation Industrial Group".